Ladder Belt

The ladder belt consists of a succession of one and the same component. These ladders are, at the sides, attached to the previous ladder by means of a S-shaped hook.  This creates a robust, open belt. In order to realize larger widths, one or more rows of eye link wire could be woven into the belt.

  • – Longitunal pitch: 6,35 up to 100 mm
  • – Wire thickness: ø 2 up to 8 mm
  • – Materials: all obtainable wire types in tensile strengths of 600 – 2000 N/mm2
  • – Temperature range: ambient up to approximately 400 °C
  • – Range of the width of the belt: 14 – 1400 mm (depending on the wire thickness, tensile strength, and pitch)
  • – Possibility to add WH-overlays to both sides
    – Possibility to add lateral chains
  • – Possibility to add cross flights
  • – Possibility to add side guards
  • – For strengthening it is possible to add wire eye links or bar links.
  • The STA belts are characterised by:- Drive on the basis of friction; no chance on belt slip
    – Preferred support: herringbone motive with a PE1000 contact surface
    – Very open and therefore simple to clean
    – High pull strength/ weight relation (depending on width, ø wire and pull strength)
    – Price technically the most favourable belt type

The ladder belt has many different applications. Several common applications are mentioned below:

  • – Cooling systems in for example bread & pastry industry.
  • – Belt in filtering installations
  • – Conveyor belt in installations for baking, frying, grilling, etc.
  • – When executed as a” batter-belt” (with bar links in order to strengthen and lateral chains)
    – Washing systems
  • – Drying systems