Despite the fact that we have explained the different applications from products of the main groups, there are still several well-known and common applications to which we have not paid enough attention.
Certain common branches in which metal belts are used are therefore described below.
It could be the case that your application isn’t mentioned at our website.
Please contact us if that’s the case, since we gladly think along with you about the opportunities.
While veneering wooden plates, Continuous Systems are used in which big metal
“Type 100: WG” conveyor belts are active. These types of installations can be very long and up to 6 meter wide. Tribelt has the technical opportunities to produce belts for these installations, even for the 6 meter wide ones. Length is no issue, the belts can basically be made infinitely long.
Metal conveyor belts are used while manufacturing gypsum products.
The use of “Type 1100: OGB-L” belt is familiar in this industry.
This installation guarantees that the product gets divided equally. This is done by means of a very stable belt run without the chance on slip.
Isolation materials are manufactured by means of a continuous process. Transport systems are thereby a ‘must’. Metal belts are often the best solution for the transport system when there is also another process to deal with.
Tribelt is, with regard to the different belt types, experienced within this market. The most common types are “Type 100: WG” and “Type 1100: OGB-L”.
We know the importance of minimalizing the risk on downtime, since, especially this market works with continuous processes. It is for the metal belts also not possible to adhere to a limitless life span. We make, upon customers’ request, appointments about our spare belts in stock.
Nowadays, we don’t know waste anymore. Something that was previously considered as waste has now become the basis of a new chain. A development, with regard to diverse new techniques on converting waste products into a material or other product, took place on the basis of both, these thoughts and the new rules applied in the field of environment.
When this doesn’t work, we are supposed to separate the useful substances from the waste. An important process in there is drying, or bed down of sludge, residue and/or manure. There are many techniques developed for this, whereby several are carried out by means of installations with belt dryers. The belt should therefore be made of metal. This is based on certain reasons, think of wear resistance, high permissible pull force, resistance against aggressive components and even legislation. Tribelt possesses diverse belt types for such dryers. “Type 1100: OGB-L” is the most common belt for this.